Bareeq Clean, a tank insulation company in Jeddah, seals ground and rooftop tanks and finds and repairs their leaks: cleaning and drying, then crack treatment, then cementitious or epoxy sealing safe for drinking water. Sealing starts from SAR 1,110, with a 3 to 5 year guarantee.
Tank insulation and leak detection, in brief
- Cementitious sealing: from SAR 1,110
- Epoxy sealing: from SAR 1,665
- Combined sealing: from SAR 2,310
- Leak detection: An inspection that locates it, on request
- Time: 1 to 3 days including curing
- Guarantee: 3 to 5 years
State the tank size and what you notice, and get the price
Article Map9 sections · jump straight to what you need
When does a tank need sealing?
Tank leak detection in Jeddah
- Level test: valves closed, the level marked and watched for 24 hours.
- Valves, float and pipes checked: much “leakage” comes from a faulty float valve.
- Emptying and visual check: cracks, joints and around incoming pipes.
- Detection devices: locate the spot without breaking anything.
- Report: the location of the leak, how it will be repaired and the price.
Types of tank sealing and their prices
| Type | What it is | Suits | Starts from |
|---|---|---|---|
| Cementitious | Two coats of a cement-based material that seals the pores | A sound concrete tank | SAR 1,110 |
| Epoxy | A hard, smooth, non-absorbent coating | Higher protection and an easy-to-clean surface | SAR 1,665 |
| Combined | Cementitious, then epoxy | Old tanks and those with many cracks | SAR 2,310 |
How a tank is sealed
- Emptying and cleaning: sediment, algae and old peeling sealant removed.
- Drying: sealant does not bond to a wet surface.
- Crack treatment: injection and filling, with corners and pipe entries reinforced.
- Sealing: at least two coats applied at right angles.
- Curing: for the time the material requires.
- Testing and rinsing: filling and watching the level, then rinsing before use.
Repairing rooftop tanks and insulating them against heat
- A cracked fibreglass tank: repaired with layers of fibre and resin.
- A cracked plastic tank: replaced, as repairs do not last.
- Heat insulation: an insulating jacket or shade lowers the water temperature and slows algae growth.
- Lid and float valve: replaced when faulty.
Tank washing and disinfection are covered in water tank cleaning in Jeddah.
Service guarantee
3 to 5 years on tank insulation and repair. Details are on the service guarantee page.
Jeddah districts we serve
Every district of Jeddah, along with Rabigh, Khulais, Usfan and Al Lith.
Book tank insulation in Jeddah
Article tags
Insulation and leaks: tank insulation Jeddah · tank sealing Jeddah · tank leak detection Jeddah · epoxy tank sealing · ground tank leak
Frequently asked questions
How much does tank insulation cost in Jeddah?
From SAR 1,110 for cementitious sealing, SAR 1,665 for epoxy and SAR 2,310 for combined sealing with Bareeq Clean.
What is the best sealing for a ground tank?
Cementitious for a sound tank, epoxy for higher protection and a smooth surface, and combined for old tanks.
How do I know the tank is leaking?
Close the valves, mark the water level and check after 24 hours. A drop with everything shut means a leak.
Is the sealing safe for drinking water?
Materials made for drinking-water tanks are used, and the sealing is left to cure, then the tank rinsed before filling.
How long does tank insulation take?
One to three days including curing, depending on the type and number of coats.
How long is the insulation guarantee?
3 to 5 years.
Can a tank be sealed without emptying it?
No. It is emptied, cleaned and dried first.
